DJI Matrice 3D
Aerial imaging versatility with DJI Matrice 3D
The DJI Matrice 3D comes equipped with an array of sophisticated cameras tailored to meet the demands of diverse aerial imaging tasks, especially when used with the DJI Dock 2.
Advanced imaging capabilities
The DJI Matrice 3D comes equipped with an array of sophisticated cameras tailored to meet the demands of diverse aerial imaging tasks, especially when used with the DJI Dock 2
- Wide-anglecamera
Matrice 3D's wide-angle camera features a 4/3 CMOS sensor, delivering exceptional clarity and detail capture. With a format equivalent to 24mm, it offers expansive coverage, ideal for panoramic shots and wide-area mapping. Tele camera
Complementing the wide-angle camera is the tele camera, equipped with a 1/2-inch CMOS sensor and offering a format equivalent to 162mm.
Despite its compact size, this camera delivers remarkable clarity with 12 megapixels effective pixel resolution, making it suitable for capturing distant subjects with precision.
Together, these cameras empower the DJI Matrice 3D to excel in a variety of aerial imaging applications, from high-precision mapping to detailed inspection tasks.
Durability and precision
The DJI Matrice 3D boasts an IP54 rating, indicating its capacity to resist dust and water, thereby ensuring consistent performance across diverse environments. This certification confirms the drone's ability to withstand challenging conditions, enhancing its longevity.The inclusion of an RTK (Real-Time Kinematic) module improves the drone's location accuracy to within ±3cm. This level of precision is crucial for applications requiring detailed spatial information, such as mapping and inspection.
Efficiency and safety in operations
The drone's ability to fly for up to 50 minutes on a single charge significantly increases the length of missions while decreasing the frequency of landings and battery swaps.Furthermore, its 10-km operational range facilitates extensive coverage and operations in areas that are otherwise hard to access.Safety is bolstered by a 6-directional obstacle sensing system, which enables the drone to identify and navigate around potential hazards, reducing the likelihood of accidents.These features establish the DJI Matrice 3D as a reliable and safe option for professional uses across various sectors, expanding the capabilities of drone technology.
Next-level autonomous drone operations
The DJI Matrice 3D drone represents another big leap forward in autonomous drone technology. It not only enhances operational efficiency but also redefines the boundaries of unmanned aerial surveillance, inspection, and data collection.By enabling remote management and advanced imaging capabilities, users across various sectors—from agriculture to emergency response—can now execute missions with unprecedented precision and reliability.
Weight
1410 g
This value includes the weight of the battery, propellers, and a microSD card, but does not include third-party payloads. The actual product weight may vary due to differences in batch materials and external factors.
Max Takeoff Weight
1610 g
Wheelbase
Diagonal Wheelbase: 463.2 mm
Left-Right Wheelbase: 359.9 mm
Front-Rear Wheelbase: 291.4 mm
Max Ascent Speed
6 m/s (Normal Mode)
8 m/s (Sport Mode)
Max Descent Speed
6 m/s (Normal Mode)
6 m/s (Sport Mode)
Max Horizontal Speed (at sea level, no wind)
Normal Mode, With Obstacle Sensing Enabled: 15 m/s flying forward, 12 m/s flying backward, 10 m/s flying sideways
Sport Mode: 21 m/s flying forward, 18 m/s flying backward, 16 m/s flying sideways
Max Wind Speed Resistance
During Operation: 12 m/s
During Takeoff/Landing: 8 m/s
Max Flight Time
50 minutes
Measured in a controlled test environment. Specific test conditions are as follows: flying forward at a constant speed of 46.8 kph in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), with Obstacle Avoidance Action set to Off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Hovering Time
40 minutes
Measured with the DJI Matrice 3D series drones hovering in a windless environment at 20 meters above sea level and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Global Navigation Satellite System
GPS + Galileo + BeiDou + GLONASS (GLONASS is supported only when the RTK module is enabled.)
Hovering Accuracy Range (windless or breezy)
ertical:
±0.1 m (with vision positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)
Horizontal:
±0.3 m (with vision positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)
Ingress Protection Rating
IP54
RTK Module
Integrated on the aircraft
Beacon
Integrated on the aircraft
Wide-Angle Camera
Image Sensor
4/3 CMOS, Effective Pixels: 20 MP
Lens
FOV: 84°Format Equivalent: 24 mmAperture: f/2.8-f/11Focus: 1 m to ∞
Lens Defogging
The wide-angle camera supports lens defogging.
ISO Range
100-6400
Shutter Speed
Electronic Shutter: 8-1/8000 s Mechanical Shutter: 8-1/2000 s
Max Image Size
5280×3956
Still Photography Modes
Single: 20 MPTimed: 20 MP, 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Low-light: 20 MP
Panorama: 20 MP (raw image); 100 MP (stitched image)
Video Resolution
H.2644K: 3840×2160@30fpsFHD: 1920×1080@30fps
4K: 130 MbpsFHD: 70 Mbps
Video Format
MP4 (MPEG-4 AVC/H.264)
Tele Camera
Image Sensor
1/2-inch CMOS, Effective Pixels: 12 MP
Lens
FOV: 15°Format Equivalent: 162 mmAperture: f/4.4Focus: 3 m to ∞
Lens Defogging
The tele camera supports lens defogging.
ISO Range
100-6400
Shutter Speed
Electronic Shutter: 8-1/8000
Video Format
MP4 (MPEG-4 AVC/H.264)
Still Photography Modes
Single: 12 MP
Timed: 12 MP, 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Low-light: 12 MP
Video Resolution
H.2644K: 3840×2160@30fpsFHD: 1920×1080@30fps
Digital Zoom
8x (56x hybrid zoom)
Gimbal
Stabilization
3-axis mechanical gimbal (tilt, roll, pan)
Tilt: -135° to +45°Roll: -45° to +45°Pan: -27° to +27°
Battery
Capacity 7811 mAh
Voltage 14.76 V
Max Charging Voltage 17.0 V
Type Li-ion 4S
Chemical System LiNiMnCoO2
Energy 115.2 Wh
Weight 544 g
Cycle Count 400
Charging Temperature 5° to 45° C (41° to 113° F)
Power Adapter
Input 100-240 V (AC), 50/60 Hz, 2.5 A
Output Power 100 W
Output Max output power of 100 W (total)
When both ports are used, the power adapter will dynamically allocate the output power of the two ports according to the load power, and the maximum output power of one of the ports is 82 W.
Productos Relacionados
Envíos a USA y PR / Recogidos en nuestras oficinas.
Acompaña tu pedido de nuestros "Unboxing Coaching"
Paga a plazos desde 0% APR* a 6 Meses o financea tu compra hasta 36 meses
* Vía Paypal Later (requiere aprobación)
Haz tu "Wish List"
Envíos a USA y PR / Recogidos en nuestras oficinas.
Acompaña tu pedido de nuestros "Unboxing Coaching" y Cursos Profesionales
Paga a plazos desde 0% APR* a 6 Meses o financea tu compra hasta 36 meses
* Vía Paypal Later o KLARNA (requiere aprobación)
